SSAA NSW

NSW Shooter June 2021

Issue link: http://ssaansw.uberflip.com/i/1383230

Contents of this Issue

Navigation

Page 27 of 43

28 NSW POLICE CONTINUES TO CONDUCT STATEWIDE SAFE STORAGE AND FIREARM INSPECTIONS. All firearms holders in NSW can expect to get a call from their local police asking to arrange a suitable time for a safe storage inspection. The inspection will cover firearm and ammunition safe storage compliance and that all firearms are accounted for. Remember, you are not being individually targeted by a request for inspection. Always be polite and courteous when making the initial arrangement for inspection and during the inspection itself. SAFE STORAGE COMPLIANCE Different categories of licence require different levels of safe storage. The most common being Categories A and B at Level 1. Category C, D and H require Level 2 and Category G Collector requires Level 9. Further details on safe storage and other compliance requirements can be found on the NSW Police Firearms Registry website: https://www. police.nsw.gov.au/online_services/firearms PREPARATION FOR INSPECTION. It is very important that you use your time wisely and be prepared by ensuring that all is in order before the inspection occurs. The following checklist may assist you: The Safe: Make a point of checking that all is in order with your safe storage – 1. Construction and lock up of safe. • Is it compliant for the category of firearm secured within? 2. Anchor points/ bolts securing safe to building. • Ensure that it is secured to the building as required. • If your safe is over 150kg and it is not secured to the building can you prove its weight? 3. Are your firearms stored inside a residential building? • If not, is it in a shed/building of a solid nature? • If not, can that building be easily and clearly seen from the residence? If not, that location will not comply. • Are there any tools which could be used to break into the safe (eg. an angle grinder) accessible or near where the safe is located? If so, then remove from the area or secure them in a locked cabinet. 4. Access to firearms. • Make sure that only licensed persons – family or otherwise have access to the firearms. • An unlicensed person who can easily gain access to a key to your firearm safe may result in your licence being revoked and your firearms confiscated. Firearms: Make a point of checking that all is order with your firearms – 5. Stocktake of firearms. • Do you have all firearms registered to you on the premises? • Do you have firearms stored at a different address? • If a firearm is registered as stored at your residential address, it needs to be there at inspection time. • If you have firearms stored at a different address, have you previously advised Firearms Registry of this? 6. Rego papers • Police conducting the inspection will have a list of serial and registration numbers with them. • Rego papers can make things a lot easier, however, in resolving unclear serial numbers or make/model confusion. 7. Safe contents • Is there anything in your safe that should not be there? • Of course, it is expected that only lawfully registered firearms are stored in your safe. • If, however, you share safe storage with another person, advise the police of this Where a safe storage inspection is unannounced, you do have the opportunity to request that arrangements be made for a more suitable time.

Articles in this issue

Links on this page

Archives of this issue

view archives of SSAA NSW - NSW Shooter June 2021